SiS Sensoren Instrumente Systeme GmbH
Calibration and Inspection Service
Services
We offer a kind of different standard and enhanced services for SiS products. The basic services are:
- Functional Tests to check for the operational status of the instruments including control of calibration at one point
- Calibration Controls to compare the instrument readings with reference values including control certificate and functional test
- Re-Calibrations including calibration certificate and functional test
- Inspections including dismantling, mantling, exchange of wearing parts, re-calibration, calibration certificate and functional test
Product | Available Service | Notes |
---|---|---|
ASB | Functional Test | Transmission test |
Inspection | ||
CTD | Functional Test | |
Temperature Calibration | ||
Conductivity Calibration | ||
Pressure Calibration | ||
Inspection | The CTD inspection does not include re-calibration for any parameter. Calibration must be specified explicitly for each parameter. | |
DOA | Re-Calibration | Re-adjustment of photometer. Requires only photometer and interface box for service. |
Inspection | Including cleaning of burette and re-adjustment of photometer. | |
SMM | Functional Test | Transmission test |
Inspection | ||
RPM | Calibration Control | Standalone re-calibration is not available. Please choose inspection. |
Inspection | ||
RPM X | Calibration Control | |
Re-Calibration | ||
Inspection | ||
RTM | Calibration Control | Standalone re-calibration is not available. Please choose inspection. |
Inspection | ||
RTM X | Calibration Control | |
Re-Calibration | ||
Inspection | ||
SOFTSAL | none | No service necessary |
Related topics:
Calibration Information (calibration points, used equipment)